Medical Device Regulations and custom-made device documentation: A further ten frequently asked questions and their answers.

During the 1990s, three Directives were enacted that aimed to harmonise the regulation of medical devices within the European Union (EU). Custom-made devices (CMDs) were subject to Council Directive 93/42/EEC of 14 June 1993 concerning medical devices (Medical Device Directive [MDD]), which was given effect in the UK by the Medical Devices Regulations 2002 (UK MDR 2002). Regulation (EU) 2017/745 (Medical Device Regulation [EU MDR]) replaced the MDD and was transposed into the Medical Devices (Amendment etc.) (EU Exit) Regulations 2019 in the UK. The UK left the EU on 31 January 2020 and entered an 11-month implementation period (IP), during which any new EU legislation that was enacted also took effect in the UK. The EU MDR was scheduled to be fully implemented on 26 May 2020 (during the IP) but this was deferred for one year, until 26 May 2021 (after the IP had concluded), as a result of the coronavirus disease 2019 (COVID-19) pandemic. Consequently, the EU MDR was removed from the UK statute book by a further amendment to the UK MDR 2002, the Medical Devices (Amendment etc.) (EU Exit) Regulations 2020. Since 1 January 2021, CMDs manufactured in Great Britain can conform to either the UK MDR 2002 (as amended) or the EU MDR (until 30 June 2023) while devices manufactured in Northern Ireland are subject to the EU MDR alone. CMDs must be supplied with a statement, a label and, depending on the risk class, instructions for use; this paper answers ten questions regarding this documentation following these legislative changes.

Medical Device Regulations and custom-made device documentation: Ten frequently asked questions and their answers.

Dental professionals who practice in the UK must follow the General Dental Council (GDC) Standards, one of which is to "find out about laws and regulations that affect your work and follow them". Dental professionals manufacture custom-made devices (CMDs) and the legislation that governs these devices has changed. Medical devices manufactured within the European Union (EU) were previously subject to Council Directive 93/42/EEC (Medical Devices Directive [MDD]), which was given effect in UK law by The Medical Devices Regulations 2002 (Statutory Instrument 2002/618 [UK MDR 2002]). Regulation (EU) 2017/745 (Medical Device Regulation [EU MDR]) was scheduled to replace the MDD on 26 May 2020, but this was postponed for one year due to the coronavirus (COVID-19) pandemic. In preparation for the UK's departure from the EU, the EU MDR was largely transposed into The Medical Devices (Amendment etc.) (EU Exit) Regulations 2019 (Statutory Instrument 2019/791 [UK MDR 2019]), which amended the UK MDR 2002, and was expected to come into effect on 1 January 2021 but a further amendment, The Medical Devices (Amendment etc.) (EU Exit) Regulations 2020 (Statutory Instrument 2020/1478 [UK MDR 2020]), removed these provisions. As of 1 January 2021, medical devices in Great Britain are subject to either the UK MDR 2002 (as amended) or the EU MDR (until 30 June 2023) while those in Northern Ireland must be manufactured in accordance with the EU MDR. This paper provides the answers to some key questions regarding the documentation that must be supplied with CMDs following these changes.

Medical device legislation for custom-made devices after the UK has left the EU: answers to ten important questions.

The 1990s saw the introduction of three European directives that aimed to harmonise medical device legislation within the European Union (EU), which were given effect in the UK by The Medical Devices Regulations 2002 (Statutory Instrument 2002/618). Dental professionals who prescribe and manufacture custom-made devices were required to do so in accordance with the relevant requirements of one of these directives, Council Directive 93/42/EEC (Medical Device Directive [MDD]). The MDD has been replaced by Regulation (EU) 2017/745 (Medical Device Regulation [EU MDR]) and this paper answers some important questions regarding the ways in which this affects the provision of custom-made devices in a dental setting.

Medical Device Regulation: Requirements for Dental Professionals Who Prescribe and Manufacture Custom-Made Devices.

A custom-made device (CMD) is a medical device intended for the sole use of a particular patient. In a dental setting, CMDs include prosthodontic devices, orthodontic appliances, bruxism splints, speech prostheses and devices for the treatment of obstructive sleep apnoea, trauma prevention and orthognathic surgery facilitation (arch bars and interocclusal wafers). Since 1993, the production and provision of CMDs have been subject to European Union (EU) Directive 93/42/EEC (Medical Device Directive, MDD) given effect in the UK by The Medical Devices Regulations 2002 (Statutory Instrument 2002/618), and its subsequent amendments. Regulation (EU) 2017/745 (Medical Device Regulation, EU MDR) replaces the MDD and the other EU Directive pertaining to Medical Devices, Council Directive 90/385/EEC (Active Implantable Medical Device Directive, AIMDD). The EU MDR was published on 5 April 2017, came into force on 25 May 2017 and, following a three-year transition period was due to be fully implemented and repeal the MDD on 26 May 2020, but was deferred until 26 May 2021 due to the coronavirus disease 2019 (COVID-19) pandemic.In the UK, in preparation for the country's planned departure from the EU, the EU MDR, with necessary amendments, was transposed into UK law (Medical Devices (Amendment etc.) (EU Exit) Regulations 2019, UK MDR). The UK left the Union on 31 January 2020 and entered a transition period that ended on 31 December 2020, meaning that, from 1 January 2021, dental professionals in Great Britain who prescribe and manufacture CMDs are mandated to do so in accordance with the new legislation while Northern Ireland remains in line with the EU legislation and implementation date. This paper sets out the requirements that relate to the production and provision of CMDs in a UK dental setting.